Outdoor

The EULO medium height aluminum bar stool is a new addition to our range. The frame is WALNUT (wood) in color and has a medium height and wide curved back and wide seat, made of GREY synthetic Rattan ("twisted" that looks like a rope). This stool is ideal for a multitude of outdoor uses.


DIMENSIONS:
60x60x99H cm.
Seat dimensions: 42x46 cm.
Back dimensions: 60x25 cm.
Arm height: 93 cm.
Seat height: 66 cm.
Leg height: 61 cm.
Leg distance: 43.5x58 cm.
Back leg distance: 54-58 cm
Aluminum specifications: Φ28 + Φ32 x 1.5mm


CONSTRUCTION MATERIALS:
The frame is made of powder coated aluminum. Aluminum is a "green" material that can be recycled indefinitely, maintaining its characteristics without any quality degradation. Aluminum is corrosion resistant by nature. Powder coating is a dry coating process used as a metal finish. Powder coating is applied as dry powder through an electrostatic process, then cured with heat.

Synthetic Rattan is a synthetic material made of PVC, that is, high-quality artificial fibers. This gives excellent strength and durability in extreme heat or cold conditions.

MAINTENANCE:
Thanks to the durability of both aluminum and synthetic Rattan, the maintenance is easy. In addition to regular dusting, you can wipe it with a damp cloth. Do not use chemical cleaners, like bleach etc.

ADVANTAGES:
•Sturdy construction
•Modern design
•Aesthetic superiority with the combination of synthetic Rattan and aluminum
•Ease of maintenance
•STACKABLE
•Amazing value for money

** The color rendering of the product may differ slightly from its photographic representation on your screen.

The TRILAN aluminum armchair is simple and beautiful. The striking two-tone color of the frame in ANTHRACITE color, with synthetic RATTAN upholstery in NATURAL color on the seat and back, is unique. This armchair will aesthetically upgrade the space you will place it in and will catch the eye thanks to its construction materials. Also, the fact that it is STACKABLE makes it particularly practical since you can store it in the smallest possible space.

DIMENSIONS:
57x59x85H cm.
Seat height: 45 cm.
Height of arms: 66 cm.
Seat dimensions: 39x49 cm.
Back dimensions: 47x28-45 cm.
Leg distance: 49x51 cm.
Aluminum specifications: 28x1.5mm

CONSTRUCTION MATERIALS:
The frame of the armchair is made of powder coated aluminum. Aluminum is a "green" material that can be recycled indefinitely, maintaining its characteristics without any quality degradation. Aluminum naturally forms a thin oxide layer on the surface in contact with air, which provides very good corrosion protection.

Info: Powder coating is a dry coating process used as a metal finish mostly on industrial equipment. Powder coating is applied as dry powder through an electrostatic process, then cured with heat. It is well known for providing high-quality finishes in terms of both functionality and overall look.

The armchair is upholstered with polyester RATTAN in twisted form, which looks like rope.

MAINTENANCE:
Thanks to the durability of both aluminum and polyester RATTAN, the maintenance of the armchair is easy. In addition to regular dusting, you can wipe it with a damp cloth. We do NOT use detergents, bleaches, and polishes. If, nevertheless, the use of detergent is necessary, then we use mild soap with warm water. We do NOT use a pressure machine or hose with pressure because it will damage the fibers.

ADVANTAGES:
•Sturdy construction
•Modern design
•Ease of maintenance
•Stackable
•Amazing value for money

** The color rendering of the product may differ slightly from its photographic representation on your screen.

OSLO is a beautiful armchair. Its frame with the curvy arms is made of high-quality teak wood, just like the mid-height unique backrest, while the wide seat is made of masterfully knitted rope of the highest quality in BLACK color. The wood is in BLACK color which makes the armchair stand out in the space and can, with a matching table, beautify any space where it is placed.

*RECOMMENDED FOR HOME USE

DIMENSIONS:
55x54x80Η cm.
Seat height: 44 cm.
Height of arms: 68 cm.
Seat dimensions: 33-40x50 cm.
Back dimensions: 43x19 cm.
Leg distance: 49x52 cm.

CONSTRUCTION MATERIALS:
The frame of the armchair is made of excellent quality solid TEAK wood, which gives it sturdiness and great durability. When we refer to solid wood, we mean wood made entirely from the trunk of a tree. Solid wood is the most expensive choice in terms of wood but stands out for its timeless aesthetics.
TEAK is the most popular type of hardwood. It is yellow to dark brown in color, extremely heavy, high strength, weather resistant, warp resistant and does not decompose. Often, the “waters” of this wood are strong and straight. It is used for many interior and exterior constructions.

MAINTENANCE:
The fact that TEAK is included in hardwoods makes it very easy to maintain. All it needs is a dusting and when necessary, a cleaning with a damp cloth.

ADVANTAGES:
•Sturdy construction
•Aesthetically beautiful armchair which will fit anywhere
•Value for money
•Delivered ready to use, already assembled

Professional round tabletop made of HPL in INDIAN SHESMAN coloring, which is suitable for contact with food. In general, the material is environmentally friendly. It can be used in cafes, restaurants, and tourist accommodation, either indoors or outdoors.

DIMENSIONS:
Φ60cm.
Thickness: 12mm.

CONSTRUCTION MATERIAL:
The tabletop is made of HPL. This is none other than bakelite also known as laminate, which is a coating material made of synthetic resin, durable and hard. Its real name, then, is High Pressure Laminate 'HPL'. Bakelite is boards covered with sheets of synthetic materials that look like wood and has a matte or glossy finish. There is a huge variety of colors and imitations of wood or other designs. Its main characteristics are its resistance to impacts, abrasion and stains, its resistance to the creation of bacteria and finally its color stability to sunlight and artificial lighting. It also shows resistance to high temperatures, with excellent resistance to fire, scratches and it is particularly resistant to water.

In case you wish to have the HPL surface pre-drilled by our company, the cost amounts to 4 euros per piece.
Important note:
Before installing the screws, you should check their size to avoid surface damage.
(If the wrong screws are installed the surface will be damaged as the screws penetrate it. To avoid damage to the product it is recommended to check the screw size before it is installed on the surface, even if the screws are from our company or you buy them on the market.)
The product is of European origin and manufacture.

** The color rendering of the product may differ slightly from its photographic representation on your screen.

Professional oval tabletop in INDIAN SHESMAN coloring. These tops are suitable for contact with food. In general, the material is environmentally friendly. It can be used in cafes, restaurants, and tourist accommodation, either indoors or outdoors.

DIMENSIONS:
146X94 cm.
Tabletop thickness: 3 cm.

CONSTRUCTION MATERIAL:
The tabletop is made of Werzalit. Werzalit is a strong, dense, and synthetic material that is resistant to scratches, temperature fluctuations and stains, while its performance is stable (i.e., it has tremendous durability) even under the harshest indoor and outdoor conditions. The surface can withstand heat up to 180 degrees Celsius (356F) without getting burned and will not show burn marks from cigarettes or hot plates. This material is the result of a patented process that uses specialized machinery that creates enormous pressure to mold wood grains and resin into usable shapes.
---- They may show slight bends in their "body" after prolonged exposure to the sun and high temperatures. However, they return to their original state when stored at a low temperature.

MAINTENANCE:
Werzalit is easy to clean and maintain, making it a hygienic surface. It doesn’t require any special cleaners.

Important note:
The package does NOT include screws for installation.
Before installing the screws, you should check their size to avoid surface damage.
ATTENTION* The support base of the table should ideally cover 70% of the surface. Otherwise, after exposure to the sun there is a high possibility of distortion of the surface.

CLOD is a practical metal closet(wardrobe) with legs, that has been made with capacity and durability in mind. It is double leafed with the two doors closing right in the middle of the structure, while the interior is divided into 3 main areas with a T-shaped metal partition. The upper part is undivided like a big shelf, while one side has a metal bar for hanging items and the other has 2 shelves that create 3 levels of storage. The doors have a lock that can be locked with a key, while the color of the wardrobe is a very light GREY.

DIMENSIONS:
90x40x190H cm.
Leg height: 10 cm.

CONSTRUCTION MATERIALS:
The closet is powder-coated metallic. Powder coating is a dry coating process used as a metal finish. Powder coating is applied as dry powder through an electrostatic process, then cured with heat.

MAINTENANCE:
You can wipe all surfaces with a damp cloth and if there are persistent stains you can use a mild cleaner.

ADVANTAGES:
• Sturdy construction
• Very spacious
• Satisfactory dimensions
• Combines quality construction with ergonomics
• Value for money

Remarks:
The product is delivered unassembled in factory packaging, with detailed assembly instructions.

DURON is a practical short metal closet with legs, that has been made with capacity for its size, and durability in mind. It is double leafed with the two doors closing right in the middle of the structure, while the interior is a single space without vertical partitions. It has 2 shelves that create 3 storage spaces. The doors have a lock that can be locked with a key, while the color of the wardrobe is a very light gray.

DIMENSIONS:
90x40x100H cm.
Leg height: 10 cm.

CONSTRUCTION MATERIALS:
The closet is powder-coated metallic. Powder coating is a dry coating process used as a metal finish. Powder coating is applied as dry powder through an electrostatic process, then cured with heat.

MAINTENANCE:
You can wipe all surfaces with a damp cloth and if there are persistent stains you can use a mild cleaner.

ADVANTAGES:
• Sturdy construction
• Very spacious for its size
• Combines quality construction with ergonomics
• Value for money

Remarks:
The product is delivered unassembled in factory packaging, with detailed assembly instructions.

DURON is a practical metal closet with legs, that has been made with capacity and durability in mind. It is double leafed with the two doors closing right in the middle of the structure, while the interior is a single space without vertical partitions. It has a metal INOX bar on the top for hanging, and 4 shelves that create 5 storage spaces. The doors have a lock that can be locked with a key, while the color of the wardrobe is a very light gray.

DIMENSIONS:
90x40x190H cm.
Leg height: 10 cm.

CONSTRUCTION MATERIALS:
The closet is powder-coated metallic. Powder coating is a dry coating process used as a metal finish. Powder coating is applied as dry powder through an electrostatic process, then cured with heat.

MAINTENANCE:
You can wipe all surfaces with a damp cloth and if there are persistent stains you can use a mild cleaner.

ADVANTAGES:
• Sturdy construction
• Very spacious
• Satisfactory dimensions
• Combines quality construction with ergonomics
• Value for money

Remarks:
The product is delivered unassembled in factory packaging, with detailed assembly instructions.

CHARLOTTE is an armchair of incomparable beauty. Its classic frame is made of high-quality wood, while both the mid-height backrest and the wide seat are made of masterfully knitted rope of the highest quality in BEIGE color. The wood is in NATURAL color which can easily be combined with various decorative patterns. An armchair that, with a matching table, can elevate any space it will be placed.

DIMENSIONS:
58x61x81H cm.
Seat dimensions: 41x51 cm.
Back dimensions: 49.5x20 cm.
Arm height: 67 cm.
Seat height: 46 cm.
Leg height: 40.5 cm.
Leg distance: 52-57x49.5-56 cm.
Back leg distance: 40-47 cm.

CONSTRUCTION MATERIALS:
The frame of the armchair is made of excellent quality solid TEAK wood, which gives it sturdiness and great durability. When we refer to solid wood, we mean wood made entirely from the trunk of a tree. Solid wood is the most expensive choice in terms of wood but stands out for its timeless aesthetics.
TEAK is the most popular type of hardwood. It is yellow to dark brown in color, extremely heavy, high strength, weather resistant, warp resistant and does not decompose. Often, the “waters” of this wood are strong and straight. It is used for many interior and exterior constructions.

MAINTENANCE:
The fact that TEAK is included in hardwoods makes it very easy to maintain. All it needs is a dusting and when necessary, a cleaning with a damp cloth.

ADVANTAGES:
•Sturdy construction
•Aesthetically beautiful armchair which will fit anywhere
•Value for money
•Delivered ready to use, already assembled

** The color rendering of the product may differ slightly from its photographic representation on your screen.
*RECOMMENDED FOR HOME USE

The IKARIA professional beach lounger of our company in WALNUT color is a modern and luxurious proposition for the beach. It rests on 4 short legs on the four corners. Its wooden construction makes it incredibly durable and sturdy. The recline “stepper” has 5 reclining positions which is achieved by a rope handle located on the back side of the backrest, and combined with its large dimensions, it offers everything you want from a luxury beach lounger.

DIMENSIONS:
80x208x100H cm.
Distance from the ground: 5 cm.
Sideboard height: 9.5 cm.
Recline “stepper” specifications: stainless steel metal bar Φ10, which locks into recessed positions in the frame.

CONSTRUCTION MATERIALS:
The entire beach lounger is made of water-based pine wood with impregnation. Pine is a soft, white, or pale-yellow wood that is light in weight with straight grain. It resists shrinkage, swelling and bending. Impregnation in the broadest sense is the coloring of wood (usually varnishes) by the dipping method.

MAINTENANCE:
The key to keeping your deckchair looking like new for many years is regular cleaning with a damp cloth to remove the saltiness.

** The color rendering of the product may differ slightly from its photographic representation on your screen.

Made in Greece—Made upon request